SkillPort
 Print

Previous Topic

Next Topic

Home Page

Home Page settings allow you to configure specific items on the Skillport home page, shown below.

Sample home page and Welcome text

To configure Home Page settings

  1. Click Display | Home Page on the navigation bar.
  2. Configure the settings as needed:

    Field

    Description

    Show Image

    Determines if the home page graphic is displayed on the home page.

    If you select this check box, the image specified in the Image URL text box is displayed on the home page above the welcome text.

    If you clear this check box, no image is displayed on the home page, and the welcome text appears at the top of the frame. In addition, the Image URL text box is disabled.

    Image URL

    Enter the absolute or relative URL to the home page graphic. The recommended dimensions are 500 x 200 pixels.

    Restrictions:

    • The image must be in JPEG format with a .jpg extension.
    • The image cannot be replaced with pure text. However, it is possible to make an image of the requested text and use that as the graphic.
    • The image is always centered horizontally with respect to the home page border box.
    • This image is vertically aligned above the home page border box.
    • This image is horizontally aligned left. The padding to the right of the image will dynamically fill to consume the remaining width where the home page graphic is not displayed.

    Show Welcome Message

    Determines if the welcome text is displayed on the home page.

    If you select this check box, the text in the Welcome Message text field is displayed on the home page.

    If you clear this check box, the welcome text is not displayed, and the "Powered by Skillsoft" image appears just below the home page graphic. In addition, the Welcome Message text field is disabled.

    Welcome Message

    Enter the welcome message to display on the home page. Plain text is acceptable. However, you can also use the formatting controls to add bold, italics, underline, unordered lists, ordered lists, and hyperlinks.

  3. Click Save.